AEROSPACE CHINA ›› 2025, Vol. 25 ›› Issue (3/4): 3-18.doi: 10.3969/j.issn.1671-0940.2024.03.001
• ADDITIVE MANUFACTURING TECHNOLOGY • Next Articles
An Overview of Multi-material Additive Manufacturing Processes
LIU Yuan1,2, LIU Guangtong1,2, MENG Fanwei1,2, TIAN Dongbo1,2
- 1 Beijing Institute of Spacecraft Environment Engineering, Beijing 100094;
2 Assembly Technology Center of CASC, Beijing 100094
-
Online:2024-12-20Published:2025-02-21
Cite this article
LIU Yuan, LIU Guangtong, MENG Fanwei, TIAN Dongbo. An Overview of Multi-material Additive Manufacturing Processes[J]. AEROSPACE CHINA, 2025, 25(3/4): 3-18.
share this article
| [1] Bandyopadhyay A, Traxel K D, Bose S.Nature-inspired materials and structures using 3D Printing[J]. Materials Science and Engineering: R: Reports, 2021, 145: 100609. [2] JIANG J, XIONG Y, ZHANG Z, et al.Machine learning integrated design for additive manufacturing[J]. Journal of Intelligent Manufacturing, 2022, 33(4): 1073-1086. [3] Dinar M, Rosen D W.A design for additive manufacturing ontology[J]. Journal of Computing and Information Science in Engineering, 2017, 17(2): 021013. [4] Rosen D, Kim S.Design and manufacturing implications of additive manufacturing[J]. Journal of Materials Engineering and Performance, 2021, 30(9): 6426-6438. [5] WANG D, DENG G W, YANG Y Q, et al.Research progress on additive manufacturing of metallic heterogeneous materials[J]. Chinese Journal of Mechanical Engineering, 2021, 57(1):186-198. [6] LIANG C.Integrated optimization design of material-structure-process for high-performance and lightweight structures—an interview with Professor Zhu Jihong of Northwestern Polytechnical University[J]. Aeronautical Manufacturing Technology, 2018(10):26-28. [7] Guessasma S, Nouri H, Roger F.Microstructural and mechanical implications of microscaled assembly in droplet-based multi-material additive manufacturing[J]. Polymers, 2017, 9(8), 372. [8] Mirzaali M J, Herranz de la Nava A, Gunashekar D, et al. Fracture behavior of bio-inspired functionally graded soft-hard composites made by multi-material 3D printing: the case of Colinear Cracks[J]. Materials, 2019, 12(17), 2735. [9] Sheydaeian E.Systems, materials, and methodologies for multi-material hybrid additive manufacturing functionally graded structures [D]. UWSpace, 2017. [10] Vaezi M, Chianrabutra S, Mellor B, et al.Multiple material additive manufacturing - Part1: a review[J]. Virtual and Physical Prototyping, 2013, 8(1): 19-50. [11] Toursangsaraki M.A Review of Multi-material and Composite Parts Production by Modified Additive Manufacturing Methods[M]. 2018. [12] LI Y, FENG Z, HAO L, et al.A review on functionally graded materials and structures via additive manufacturing: from multi-scale design to versatile functional properties[J]. Advanced Materials Technologies, 2020, 5, 1900981. [13] Ahankari S S, Kar K K.Composite Materials: Processing, Applications, Characterizations[M]. Springer Berlin Heidelberg, 2017: 119-168. [14] Kieback B, Neubrand A, Riedel H.Processing techniques for functionally graded materials[J]. Materials Science and Engineering: A, 2003, 362(1): 81-106. [15] Chung H, Das S.Processing and properties of glass bead particulate-filled functionally graded Nylon-11 composites produced by selective laser sintering[J]. Materials Science and Engineering: A, 2006, 437(2): 226-234. [16] Ahsan M R U, Tanvir A N M, Ross T, et al. Fabrication of bimetallic additively manufactured structure (BAMS) of low carbon steel and 316L austenitic stainless steel with wire + arc additive manufacturing[J]. Rapid Prototyping Journal, 2020, 26(3):519-530. [17] Ahsan M R U, Tanvir A N M, Seo G-J, et al. Heat-treatment effects on a bimetallic additively-manufactured structure (BAMS) of the low-carbon steel and austenitic-stainless steel[J]. Additive Manufacturing, 2020, 32: 101036. [18] Mahamood R M, Akinlabi E T.Laser metal deposition of functionally graded Ti6Al4V/TiC[J]. Materials & Design, 2015, 84: 402-410. [19] Jeong J S, Shin K H.Fabrication of functionally graded materials between P21 tool steel and Cu by using laser-aided layered manufacturing[J]. Transactions of the Korean Society of Mechanical Engineers A, 2013, 37(1): 61-66. [20] Doubrovski E L, Tsai E Y, Dikovsky D, et al.Voxel-based fabrication through material property mapping: A design method for bitmap printing[J]. Computer-Aided Design, 2015, 60: 3-13. [21] Skylar-Scott M A, Mueller J, Visser C W, et al. Voxelated soft matter via multimaterial multinozzle 3D printing[J]. Nature, 2019, 575(7782): 330-335. [22] Ituarte I F, Boddeti N, Hassani V, et al.Design and additive manufacture of functionally graded structures based on digital materials[J]. Additive Manufacturing, 2019, 30:100839. [23] Garland A, Fadel G.Design and Manufacturing Functionally Gradient Material Objects With an Off the Shelf Three-Dimensional Printer: Challenges and Solutions[J]. Journal of Mechanical Design, 2015, 137(11). [24] Baca Lopez D M, Ahmad R. Tensile Mechanical Behaviour of Multi-Polymer Sandwich Structures via Fused Deposition Modelling [K]. Polymers, 2020. [25] Chueh Y H, Zhang X, Wei C, et al.Additive Manufacturing of Polymer-Metal/Ceramic Functionally Graded Composite Components via Multiple Material Laser Powder Bed Fusion[J]. Journal of Manufacturing Science and Engineering, 2020, 142(5). [26] Chueh Y H, Wei C, Zhang X, et al.Integrated laser-based powder bed fusion and fused filament fabrication for three-dimensional printing of hybrid metal/polymer objects[J]. Additive Manufacturing, 2020, 31: 100928. [27] HE M, ZHANG X, dos Santos Fernandez L, et al. Multi-material topology optimization of piezoelectric composite structures for energy harvesting[J]. Composite Structures, 2021,265: 113783. [28] Emon M O F, Alkadi F, Philip D G, et al. Multi-material 3D printing of a soft pressure sensor[J]. Additive Manufacturing, 2019, 28: 629-638. [29] WANG D, LI S.Material selection decision-making method for multi-material lightweight automotive body driven by performance[J]. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2021,236(4): 730-746. [30] Jiang C P, Hentihu M F R, Lee S Y, et al. Multiresin additive manufacturing process for printing a complete denture and an analysis of accuracy[J]. 3D Printing and Additive Manufacturing, 2021, 9(6): 511-519. [31] Han D, Lee H.Recent advances in multi-material additive manufacturing: methods and applications[J]. Current Opinion in Chemical Engineering, 2020, 28: 158-166. [32] Hasanov S, Gupta A, Alifui-Segbaya F, et al.Hierarchical homogenization and experimental evaluation of functionally graded materials manufactured by the fused filament fabrication process[J]. Composite Structures, 2021, 275: 114488. [33] Halbig M C, Singh M.Additive Manufacturing of Multi-Material Systems for Aerospace Applications, 2019. [34] Venumbaka S A, Covarubias M, Cesaro G, et al.Application of Multi Materials Additive Manufacturing Technique in the Design and Manufacturing of Hand Orthoses [C]. //Klaus Miesenberger, Roberto Manduchi, Mario Covarrubias Rodriguez and Petr Peňáz. Springer International Publishing, 2020:461-468. [35] Tan Y J N, Yong W P, Low H R, et al. Customizable drug tablets with constant release profiles via 3D printing technology[J]. International Journal of Pharmaceutics, 2021, 598:120370. [36] Mitchell A, Lafont U, Hołyńska M, et al.Additive manufacturing — A review of 4D printing and future applications[J]. Additive Manufacturing, 2018, 24: 606-626. [37] Joshi S, Rawat K, C K, et al. 4D printing of materials for the future: Opportunities and challenges[J]. Applied Materials Today, 2020, 18: 100490. [38] ZHENG Y, ZHANG W, Baca Lopez D M, et al. Scientometric Analysis and Systematic Review of Multi-Material Additive Manufacturing of Polymers[J]. Polymers, 2021. [39] Nasirov A, Hasanov S, Fidan I.Prediction of mechanical properties of fused deposition modeling made parts using multiscale modeling and classical laminate theory[C]. University of Texas at Austin. [40] Wickramasinghe S, Do T, Tran P.FDM-Based 3D printing of polymer and associated composite: a review on mechanical properties, defects and treatments[J]. Polymers, 2020. [41] Gupta A, Fidan I, Hasanov S, et al.Processing, mechanical characterization, and micrography of 3D-printed short carbon fiber reinforced polycarbonate polymer matrix composite material[J]. The International Journal of Advanced Manufacturing Technology,2020, 107(7-8): 3185-3205. [42] Gupta A, Hasanov S, Fidan I, et al.Homogenized modeling approach for effective property prediction of 3D-printed short fibers reinforced polymer matrix composite material[J]. The International Journal of Advanced Manufacturing Technology, 2021,118(11-12): 4161-4178. [43] Gupta A, Hasanov S, Fidan I.Processing and characterization of 3d-printed polymer matrix composites reinforced with discontinuous fibers[C]. University of Texas at Austin. [44] Mohammadizadeh M, Lu H, Fidan I, et al.Mechanical and Thermal Analyses of Metal-PLA Components Fabricated by Metal Material Extrusion[J]. Inventions, 2020. [45] Hasanov S, Fidan I.Manufacturing of Soft Magnets using the Fused Filament Fabrication Process[M]. Medium: X. [46] YIN J, LU C, FU J, et al.Interfacial bonding during multi-material fused deposition modeling (FDM) process due to inter-molecular diffusion[J]. Materials & Design, 2018,150: 104-112. [47] Sanders E D, Aguiló M A, Paulino G H.Multi-material continuum topology optimization with arbitrary volume and mass constraints[J]. Computer Methods in Applied Mechanics and Engineering, 2018, 340: 798-823. [48] Loke G, Yuan R, Rein M, et al.Structured multimaterial filaments for 3D printing of optoelectronics[J]. Nature Communications, 2019, 10(1): 4010. [49] Tran N H, Nguyen V N, Ngo A V, et al.Study on the Effect of Fused Deposition Modeling (FDM) Process Parameters on the Printed Part Quality[J]. 2017: 71-77. [50] Loh G H, Pei E.Building a conceptual understanding of Functionally Graded Additive Manufacturing[J]. 2019. [51] Khondoker M A H, Asad A, Sameoto D. Printing with mechanically interlocked extrudates using a custom bi-extruder for fused deposition modelling[J]. Rapid Prototyping Journal, 2018, 24(6): 921-934. [52] Kennedy Z C, Christ J F.Printing polymer blends through in situ active mixing during fused filament fabrication[J]. Additive Manufacturing, 2020, 36: 101233. [53] Espalin D, Muse D W, MacDonald E, et al. 3D Printing multifunctionality: structures with electronics[J]. The International Journal of Advanced Manufacturing Technology, 2014, 72(5): 963-978. [54] Hasanov S, Gupta A, Nasirov A, et al.Mechanical characterization of functionally graded materials produced by the fused filament fabrication process[J]. Journal of Manufacturing Processes, 2020, 58: 923-935. [55] Yap Y L, Wang C, Sing S L, et al.Material jetting additive manufacturing: An experimental study using designed metrological benchmarks[J]. Precision Engineering, 2017, 50: 275-285. [56] Vu I Q, Bass L B, Williams C B, et al.Characterizing the effect of print orientation on interface integrity of multi-material jetting additive manufacturing[J]. Additive Manufacturing, 2018, 22: 447-461. [57] Sander I M, Liepert T T, Doney E L, et al.Patient Education for Endoscopic Sinus Surgery: Preliminary Experience Using 3D-Printed Clinical Imaging Data[J]. Journal of Functional Biomaterials, 2017. [58] Alifui-Segbaya F.Biomedical photopolymers in 3D printing[J]. Rapid Prototyping Journal, 2019, 26(2): 437-444. [59] Camara-Torres M, Duarte S, Sinha R, et al.3D additive manufactured composite scaffolds with antibiotic-loaded lamellar fillers for bone infection prevention and tissue regeneration[J]. Bioactive Materials, 2021, 6(4): 1073-1082. [60] Fanfoni L, Marsich E, Turco G, et al.Development of di-methacrylate quaternary ammonium monomers with antibacterial activity[J]. Acta Biomaterialia, 2021,129:138-147. [61] Vu I, Bass L,Meisel N.Characterization of Mutli-Material Interfaces in PolyJet Additive Manufacturing[C]. University of Texas at Austin, 2015:959-982. [62] Rocha V G, Saiz E, Tirichenko I S, et al.Direct ink writing advances in multi-material structures for a sustainable future[J]. Journal of Materials Chemistry A, 2020, 8(31):15646-15657. [63] Joung D, Truong V, Neitzke C C, et al.3D Printed Stem-Cell Derived Neural Progenitors Generate Spinal Cord Scaffolds[J]. Advanced Functional Materials, 2018, 28(39):1801850. [64] Kolesky D B, Truby R L, Gladman A S, et al.3D Bioprinting of Vascularized, Heterogeneous Cell-Laden Tissue Constructs[J]. Advanced Materials, 2014, 26(19):3124-3130. [65] Schaffner M, Faber J A, Pianegonda L, et al.3D printing of robotic soft actuators with programmable bioinspired architectures[J]. Nature Communications, 2018, 9(1): 878. [66] Saed M O, Ambulo C P, Kim H, et al.Molecularly-Engineered, 4D-Printed Liquid Crystal Elastomer Actuators[J]. Advanced Functional Materials, 2019, 29(3): 1806412. [67] Park S H, Su R, Jeong J, et al.3D Printed Polymer Photodetectors[J]. Advanced Materials, 2018, 30(40): 1803980. [68] Wei T S, Ahn B Y, Grotto J, et al.3D Printing of Customized Li-Ion Batteries with Thick Electrodes[J]. Advanced Materials, 2018, 30(16): 1703027. [69] Kokkinis D, Bouville F, Studart A R.3D Printing of Materials with Tunable Failure via Bioinspired Mechanical Gradients[J]. Advanced Materials, 2018, 30(19): 1705808. [70] Hardin J O, Ober T J, Valentine A D, et al.Microfluidic Printheads for Multimaterial 3D Printing of Viscoelastic Inks[J]. Advanced Materials, 2015, 27(21): 3279-3284. [71] Peng X, Kuang X, Roach D J, et al.Integrating digital light processing with direct ink writing for hybrid 3D printing of functional structures and devices[J]. Additive Manufacturing, 2021, 40: 101911. [72] HAN D, YANG C, FANG N X, et al.Rapid multi-material 3D printing with projection micro-stereolithography using dynamic fluidic control[J]. Additive Manufacturing, 2019, 27: 606-615. [73] Zheng S, Zlatin M, Selvaganapathy P R, et al.Multiple modulus silicone elastomers using 3D extrusion printing of low viscosity inks[J]. Additive Manufacturing, 2018, 24: 86-92. [74] Ober T J, Foresti D, Lewis J A.Active mixing of complex fluids at the microscale[J]. Proceedings of the National Academy of Sciences, 2015, 112(40): 12293-12298. [75] Kong Y L, Tamargo I A, Kim H, et al.3D Printed Quantum Dot Light-Emitting Diodes[J]. Nano Letters, 2014, 14(12): 7017-7023. [76] Bagheri A, Jin J.Photopolymerization in 3D Printing[J]. ACS Applied Polymer Materials, 2019,1(4): 593-611. [77] Gibson I, Rosen D,Stucker B.Vat Photopolymerization Processes in Additive Manufacturing Technologies: 3D Printing, Rapid Prototyping, and Direct Digital Manufacturing[M]. New York: Springer New York, 2015: 63-106. [78] Chan V, Jeong J H, Bajaj P, et al.Multi-material bio-fabrication of hydrogel cantilevers and actuators with stereolithography[J]. Lab Chip, 2012, 12(1): 88-98. [79] Choi J W, Kim H C, Wicker R.Multi-material stereolithography[J]. Journal of Materials Processing Technology, 2011, 211(3): 318-328. [80] Ge Q, Sakhaei A H, Lee H, et al.Multimaterial 4D Printing with Tailorable Shape Memory Polymers[J]. Scientific Reports, 2016, 6(1): 31110. [81] Kowsari K, Akbari S, Wang D, et al.High-Efficiency High-Resolution Multimaterial Fabrication for Digital Light Processing-Based Three-Dimensional Printing[J]. 3DPrinting and Additive Manufacturing, 2018, 5(3): 185-193. [82] Zhakeyev A, Abdulrhman M, Zhang Y, et al.Upconversion 3D printing enables single-immersion multi-material stereolithography[J]. Applied Materials Today, 2023, 32:101854. [83] Grigoryan B, Paulsen S J, Corbett D C, et al.Multivascular networks and functional intravascular topologies within biocompatible hydrogels[J]. Science, 2019, 364(6439):458-464. [84] WU X, LIAN Q, LI D, et al.Biphasic osteochondral scaffold fabrication using multi-material mask projection stereolithography[J]. Rapid Prototyping Journal, 2019,25(2): 277-288. [85] Yan J, Masoudi N, Battiato I, et al.Optimization of Process Parameters in Laser Engineered Net Shaping (LENS) Deposition of Multi-Materials[C]. Volume 1A: 35thComputers and Information in Engineering Conference, 2015. [86] Dass A, Moridi A.State of the Art in Directed Energy Deposition: From Additive Manufacturing to Materials Design[J]. Coatings, 2019. [87] Saboori A, Gallo D, Biamino S, et al.An Overview of Additive Manufacturing of Titanium Components by Directed Energy Deposition: Microstructure and Mechanical Properties[J]. Applied Sciences, 2017. [88] Thompson S M, Bian L, Shamsaei N, et al.An overview of Direct Laser Deposition for additive manufacturing; Part I: Transport phenomena, modeling and diagnostics[J]. Additive Manufacturing, 2015, 8: 36-62. [89] ZHANG C, CHEN F, HUANG Z, et al.Additive manufacturing of functionally graded materials: a review[J]. Materials Science and Engineering: A, 2019, 764: 138209. [90] Ke D, Vu A A, Bandyopadhyay A, et al.Compositionally graded doped hydroxyapatite coating on titanium using laser and plasma spray deposition for bone implants[J]. Acta Biomaterialia, 2019, 84: 414-423. [91] Fousová M, Vojtěch D, Kubásek J, et al.Promising characteristics of gradient porosityTi-6Al-4V alloy prepared by SLM process[J]. Journal of the Mechanical Behavior of Biomedical Materials, 2017, 69: 368-376. [92] Choy S Y, Sun C N, Leong K F, et al.Compressive properties of functionally graded lattice structures manufactured by selective laser melting[J]. Materials & Design, 2017,131: 112-120. [93] Del Val J, Arias-González F, Barro O, et al.Functionally graded 3D structures produced by laser cladding[J]. Procedia Manufacturing, 2017, 13: 169-176. [94] Wu B, Pan Z, Ding D, et al.A review of the wire arc additive manufacturing of metals: properties, defects and quality improvement[J]. Journal of Manufacturing Processes, 2018, 35: 127-139. [95] Khodabakhshi F, Farshidianfar M H, Bakhshivash S, et al.Dissimilar metals deposition by directed energy based on powder-fed laser additive manufacturing[J]. Journal of Manufacturing Processes, 2019, 43: 83-97. [96] Gokcekaya O, Ishimoto T, Todo T, et al.Influence of powder characteristics on densification via crystallographic texture formation: Pure tungsten prepared by laser powder bed fusion[J]. Additive Manufacturing Letters, 2021, 1: 100016. [97] Glerum J A, Hocine S, Chang C S T, et al. Operando X-ray diffraction study of thermal and phase evolution during laser powder bed fusion of Al-Sc-Zr elemental powder blends[J]. Additive Manufacturing, 2022, 55: 102806. [98] Powell A W, Stavrinadis A, de Miguel I, et al. White and Brightly Colored 3D Printing Based on Resonant Photothermal Sensitizers[J]. Nano Letters, 2018, 18(11): 6660-6664. [99] CHEN J, YANG Y, SONG C, et al.Interfacial microstructure and mechanical properties of 316L /CuSn10 multi-material bimetallic structure fabricated by selective laser melting[J].Materials Science and Engineering: A, 2019, 752: 75-85. [100] ZHANG M, YANG Y, XU M, et al.Mechanical properties of multi-materials porous structures based on triply periodic minimal surface fabricated by additive manufacturing[J]. Rapid Prototyping Journal, 2021, 27(9): 1681-1692. [101] Anstaett C, Seidel C, Reinhart G.Fabrication of 3D multi-material parts using laser-based powder bed fusion[C]. University of Texas at Austin, 1548-1556. [102] Mohd Yusuf S, Zhao X, Yang S, et al.Interfacial characterisation of multi-material 316Lstainless steel/Inconel 718 fabricated by laser powder bed fusion[J]. Materials Letters, 2021, 284: 128928. [103] TAN C, WANG D, MA W, et al.Ultra-strong bond interface in additively manufactured iron-based multi-materials[J]. Materials Science and Engineering: A, 2021, 802: 140642. [104] Walker J, Middendorf J R, Lesko C C C, et al. Multi-material laser powder bed fusion additive manufacturing in 3-dimensions[J]. Manufacturing Letters, 2022, 31: 74-77. [105] Oel M, Rossmann J, Bode B, et al.Multi-material laser powder bed fusion additive manufacturing of concentrated wound stator teeth[J]. Additive Manufacturing Letters, 2023, 7: 100165. |
| [1] | SUN Aidong, HAO Yunbo, ZHU Jiahui, ZHAO Kai. A Review on Additive Manufacturing of Aluminum Alloys [J]. AEROSPACE CHINA, 2025, 25(3/4): 19-30. |
| Viewed | ||||||
|
Full text |
|
|||||
|
Abstract |
|
|||||