A Review on Additive Manufacturing of Aluminum Alloys

doi:10.3969/j.issn.1671-0940.2024.03.002

摘要/Abstract

Abstract: Aluminum alloy is widely used in military, automobile, aerospace, electronics, electric power and other industries. With the continuous development of industry, the demand for lightweight, topology structure and integration of functions and structures is becoming increasingly strong. Traditional technology has been unable to meet the demand. Additive manufacturing has significant advantages in the integrated forming of complex components due to its direct forming, strong adaptability, and short manufacturing cycle. This article comprehensively reviews the research progress of additive manufacturing of aluminum alloys in recent years, with a focus on three additive manufacturing technologies which are wire and arc additive manufacturing, laser metal deposition and selective laser melting. It reviews the principles of the three technologies and the progress in recent years and summarizes the challenges faced by the additive manufacturing of aluminum alloys and their solutions.

Key words: additive manufacturing, aluminum alloy, crack inhibition, process optimization

. A Review on Additive Manufacturing of Aluminum Alloys[J]. AEROSPACE CHINA, 2025, 25(3/4): 19-30.

SUN Aidong, HAO Yunbo, ZHU Jiahui, ZHAO Kai. A Review on Additive Manufacturing of Aluminum Alloys[J]. AEROSPACE CHINA, 2025, 25(3/4): 19-30.

参考文献

[1] Frazier W E.Metal additive manufacturing: a review[J]. Journal of Materials Engineering and Performance, 2014, 23(6): 1917-1928.
[2] FAN E X, LIU X X, LIAO W J, et al. Present status and development of mental additive maufacturing [J]. Machinery, 2019, 57(04): 1-6+10.
[3] ZHAI W, LI J, ZHOU R, et al.Improved corrosion resistance of nickel-aluminum bronze by electron beam powder bed fusion[J]. Materials Chemistry and Physics, 2023, 296: 127225.
[4] Srivastava M, Rathee S, Tiwari A, et al.Wire arc additive manufacturing of metals: A review on processes, materials and their behaviour[J]. Materials Chemistry and Physics, 2023, 294: 126988.
[5] SUN A, ZHAI W, FU Y, et al.Fabrication, high-temperature mechanical behavior, and oxidation resistance of high entropy alloys: a review[J]. Journal of Micromechanics and Molecular Physics, 2023, 08(02n03): 99-122.
[6] Dhinakaran V, Ajith J, Fathima Y F A, et al. Wire Arc Additive Manufacturing (WAAM) process of nickel based superalloys - a review[J]. Materials Today: Proceedings, 2020, 21: 920-925.
[7] WU S C, ZHU S C, ZHU Z T, et al.Laser Welding of Aluminum Alloys and the Performaance Evaluation [M]. Beijing: National Defense Industry Press, 2014.
[8] HONG T J, KONG F L, DING F J, et al.Application of Aluminum Alloy in Automotive Lightweight[J]. Hot Working Technology, 2020, 49(04): 1-6.
[9] ZHANG J, SONG B, WEI Q, et al.A review of selective laser melting of aluminum alloys: Processing, microstructure, property and developing trends[J]. Journal of Materials Science & Technology, 2019, 35(2): 270-284.
[10] WANG G, ZHAO Y, HAO Y.Friction stir welding of high-strength aerospace aluminum alloy and application in rocket tank[J]. Journal of Materials Science & Technology, 2018, 34(1): 73-91.
[11] XU W, LUO Y, ZHANG W, et al.Comparative study on local and global mechanical properties of bobbin tool and conventional friction stir welded 7085-T7452 aluminum thick plate[J]. Journal of Materials Science & Technology, 2018, 34(1): 173-184.
[12] FU S, ZHANG Y, LIU H, et al.Influence of electric field on the quenched-in vacancy and solute clustering during early stage ageing of Al-Cu alloy[J]. Journal of Materials Science & Technology, 2018, 34(2): 335-343.
[13] Langelandsvik G, Akselsen O M, Furu T, et al.Review of aluminum alloy development for wire arc additive manufacturing[J]. Materials, 2021, 14(18), 5370.
[14] Tjong S C, MA Z Y.Microstructural and mechanical characteristics of in situ metal matrix composites[J]. Materials Science and Engineering: R: Reports, 2000, 29(3): 49-113.
[15] Kim S, Moon S K.A part consolidation design method for additive manufacturing based on product disassembly complexity[J]. Applied Sciences, 2020, 10(3),1100.
[16] Jandric Z, Labudovic M, Kovacevic R.Effect of heat sink on microstructure of three-dimensional parts built by welding-based deposition[J]. International Journal of Machine Tools and Manufacture, 2004, 44(7): 785-796.
[17] Colegrove P A, Martina F, Roy M J, et al.High pressure interpass rolling of wire + arc additively manufactured titanium components[J]. Advanced Materials Research, 2014, 996: 694-700.
[18] SUI Q, WANG Z, WANG J, et al.The microstructure and mechanical properties of the additive manufactured AlCoCrFeNi high entropy alloy[J]. Materials Science and Engineering: A, 2022, 833: 142507.
[19] MA G, ZHAO G, LI Z, et al.Optimization strategies for robotic additive and subtractive manufacturing of large and high thin-walled aluminum structures[J]. The International Journal of Advanced Manufacturing Technology, 2019, 101(5): 1275-1292.
[20] LI Y, SUN Y, HAN Q, et al.Enhanced beads overlapping model for wire and arc additive manufacturing of multi-layer multi-bead metallic parts[J]. Journal of Materials Processing Technology, 2018, 252: 838-848.
[21] XIONG J, ZHANG G.Adaptive control of deposited height in GMAW-based layer additive manufacturing[J]. Journal of Materials Processing Technology, 2014, 214(4): 962-968.
[22] Mcandrew A R, Alvarez R M, Colegrove P A, et al.Interpass rolling of Ti-6Al-4V wire + arc additively manufactured features for microstructural refinement[J]. Additive Manufacturing, 2018, 21: 340-349.
[23] Singh S R, Khanna P.Wire arc additive manufacturing (WAAM): a new process to shape engineering materials[J]. Materials Today: Proceedings, 2021, 44: 118-128.
[24] FAN Y, CHEN F, GAO X, et al.Preparation and characterization of high-efficiency deposition WAAM AlSi alloy assisted through magnetic field regulation and interlayer spraying lanthanum oxide powder[J]. Journal of Manufacturing Processes, 2024, 124: 1372-1392.
[25] Le V T, Bui M C, Nguyen T D, et al.On the connection of the heat input to the forming quality in wire-and-arc additive manufacturing of stainless steels[J]. Vacuum, 2023, 209: 111807.
[26] Nagasai B P, Malarvizhi S, Balasubramanian V.Effect of welding processes on mechanical and metallurgical characteristics of carbon steel cylindrical components made by wire arc additive manufacturing (WAAM) technique[J]. CIRP Journal of Manufacturing Science and Technology, 2022, 36: 100-116.
[27] Prado-cerqueira J L, Diéguez J L, Camacho A M. Preliminary development of a Wire and Arc Additive Manufacturing system (WAAM)[J]. Procedia Manufacturing, 2017, 13: 895-902.
[28] Elrefaey A.Effectiveness of cold metal transfer process for welding 7075 aluminium alloys[J]. Science and Technology of Welding and Joining, 2015, 20: 280-285.
[29] GU J, GAO M, YANG S, et al.Pore formation and evolution in wire + arc additively manufactured 2319 Al alloy[J]. Additive Manufacturing, 2019, 30: 100900.
[30] Silva C M A, Bragança I M F, Cabrita A, et al. Formability of a wire arc deposited aluminium alloy[J]. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2017, 39(10): 4059-4068.
[31] GU J, DING J, CONG B, et al.The influence of wire properties on the quality and performance of wire+arc additive manufactured aluminium parts[J]. Advanced Materials Research, 2014, 1081: 210-214.
[32] CONG B, QI Z, QI B, et al.A comparative study of additively manufactured thin wall and block structure with Al-6.3%Cu alloy using cold metal transfer process[J]. Applied Sciences, 2017, 7(3), 275.
[33] CONG B, DING J, Williams S.Effect of arc mode in cold metal transfer process on porosity of additively manufactured Al-6.3%Cu alloy[J]. The International Journal of Advanced Manufacturing Technology, 2015, 76(9): 1593-1606.
[34] Gua J, Conga B, Dinga J, et al. Wire + Arc Additive Manufacturing of Aluminium [C/OL].2014. https://api.semanticscholar.org/CorpusID:30945753.
[35] GU J, WANG X, BAI J, et al.Deformation microstructures and strengthening mechanisms for the wire+arc additively manufactured Al-Mg4.5Mn alloy with inter-layer rolling[J]. Materials Science and Engineering: A, 2018, 712: 292-301.
[36] ZHANG C, GAO M, ZENG X.Workpiece vibration augmented wire arc additive manufacturing of high strength aluminum alloy[J]. Journal of Materials Processing Technology, 2019, 271: 85-92.
[37] GU D D, Meiners W, Wissenbach K, et al.Laser additive manufacturing of metallic components: Materials, processes and mechanisms[J]. International Materials Reviews, 2012, 57(3): 133-164.
[38] Saboori A, Gallo D, Biamino S, et al.An overview of additive manufacturing of titanium components by directed energy deposition: microstructure and mechanical properties[J]. Applied Sciences, 2017, 7(9), 883.
[39] Furlan V, Kurtay T, Grande A M, et al.A comprehensive study of A357 alloy printability via laser metal deposition[J]. Journal of Manufacturing Processes, 2023, 95: 421-433.
[40] Goh G D, Sing S L, Yeong W Y.A review on machine learning in 3D printing: applications, potential, and challenges[J]. Artificial Intelligence Review, 2021, 54(1): 63-94.
[41] Ansari M, Jabari E, Toyserkani E.Opportunities and challenges in additive manufacturing of functionally graded metallic materials via powder-fed laser directed energy deposition: a review[J]. Journal of Materials Processing Technology, 2021, 294: 117117.
[42] Nguyen T, Huang M, LI H, et al.Microstructure and tensile properties of duplex phase Al0.25FeMnNiCrCu0.5 high entropy alloy fabricated by laser melting deposition[J]. Journal of Alloys and Compounds, 2021, 871: 159521.
[43] ZHANG J, HUANG Z, FANG Y, et al.Experiments and numerical simulations for the mechanical properties of Ni-based superalloys fabricated by laser melting deposition[J]. Optics & Laser Technology, 2021, 140: 107058.
[44] WANG J, LI L, TAN C, et al.Microstructure and tensile properties of TiCp/Ti6Al4V titanium matrix composites manufactured by laser melting deposition[J]. Journal of Materials Processing Technology, 2018, 252: 524-536.
[45] Wolff S, Lin S, Faierson E, et al.A framework to link localized cooling and properties of directed energy deposition (DED)-processed Ti-6A1-4V[J]. ACTA MATERIALIA, 2017, 132: 106-117.
[46] HU Y, HUA Z, MI G, et al.Investigation on the evolution of deposition layer grain structure and its effect on mechanical properties in aluminum alloy fabricated by laser directed energy deposition[J]. Materials Science and Engineering: A, 2024, 892: 145866.
[47] LI L Q, QU J Y, WANG X.Formability and Mechanical Property of Laser Metal Deposited AlSi10Mg Alloy[J]. Surface Technology, 2019, 48(6): 332-337.
[48] XI X, CHEN B, TAN C W, et al.Influence of micron and nano SiCp on microstructure evolution and mechanical properties of laser metal deposition AlSi10Mg alloy[J]. Journal of Materials Processing Technology, 2022, 306: 117609.
[49] GU T, CHEN B, TAN C, et al.Microstructure evolution and mechanical properties of laser additive manufacturing of high strength Al-Cu-Mg alloy[J]. Optics & Laser Technology, 2019, 112: 140-150.
[50] LI L, YUAN T, YUAN X.The microstructure tailoring and property improving of directed energy deposited Al-Zn-Mg-Cu alloy modified with various Si and ZrO2 contents[J]. Materials Characterization, 2022, 188: 111896.
[51] LIU J, KOU S.Susceptibility of ternary aluminum alloys to cracking during solidification[J]. Acta Materialia, 2017, 125: 513-523.
[52] LI L, LUO L, WU Y.The microstructure regulation and property enhancement of directed energy deposited Al-Zn-Mg-Cu alloy modified with fixed Si fraction and various TiC contents[J]. Materials Today Communications, 2023, 34: 105182.
[53] WANG Y, LIN X, KANG N, et al.Laser powder bed fusion of Zr-modified Al-Cu-Mg alloy: Crack-inhibiting, grain refinement, and mechanical properties[J]. Materials Science and Engineering: A, 2022, 838: 142618.
[54] WANG Y, LIN X, ZHAO Y, et al.Microstructure and strengthening mechanisms of Zr-modified Al-Cu-Mg alloy processed by selective laser melting[J]. Materials Science and Engineering: A, 2023, 870: 144874.
[55] LIN D, XU L, LI X, et al.A Si-containing FeCoCrNi high-entropy alloy with high strength and ductility synthesized in situ via selective laser melting[J]. Additive Manufacturing, 2020, 35: 101340.
[56] KIM Y K, YU J H, KIM H S, et al.In-situ carbide-reinforced CoCrFeMnNi high-entropy alloy matrix nanocomposites manufactured by selective laser melting: Carbon content effects on microstructure, mechanical properties, and deformation mechanism[J]. Composites Part B: Engineering, 2021, 210: 108638.
[57] LAN L, WANG W, CUI Z, et al.Anisotropy study of the microstructure and properties of AlCoCrFeNi2.1 eutectic high entropy alloy additively manufactured by selective laser melting[J]. Journal of Materials Science & Technology, 2022, 129: 228-239.
[58] ZENG G, HAN Z Y, LIANG S J, et al.The Applications and Progress of Manufacturing of Metal Parts by 3D Printing Technology[J]. Materials China, 2014, 33(06): 376-382.
[59] GONG S L, SUO H B, LI H X.Development and Application of Metal Additive Manufacturing Technology[J]. Aeronautical Manufacturing Technology, 2013(13): 66-71.
[60] Garechana G, Río-belver R, Bildosola I, et al. A method for the detection and characterization of technology fronts: Analysis of the dynamics of technological change in 3D printing technology[J]. Plos Onne, 2019, 14(1).
[61] Rometsch P A, ZHU Y, WU X, et al.Review of high-strength aluminium alloys for additive manufacturing by laser powder bed fusion[J]. Materials & Design, 2022, 219: 110779.
[62] Karna S, YUAN L, ZHANG T, et al. Microstructural analysis and defect characterization of additively manufactured AA6061 aluminum alloy via laser powder bed fusion [J/OL]. Journal of Materials Science & Technology, 2024[2024-10-08]. https://www.sciencedirect.com/science/article/pii/S1005030224009125.
[63] YAN Q, SONG B, SHI Y.Comparative study of performance comparison of AlSi10Mg alloy prepared by selective laser melting and casting[J]. Journal of Materials Science & Technology, 2020, 41: 199-208.
[64] LI R, WANG M, LI Z, et al.Developing a high-strength Al-Mg-Si-Sc-Zr alloy for selective laser melting: Crack-inhibiting and multiple strengthening mechanisms[J]. Acta Materialia, 2020, 193: 83-98.
[65] HUANG B, LIU Y, ZHOU Z, et al.Selective laser melting of 7075 aluminum alloy inoculated by Al-Ti-B: Grain refinement and superior mechanical properties[J]. Vacuum, 2022, 200: 111030.

ISSN 1671-0940

CN 11-4673/V